Skip to Main Content
PTAGIS logo link back to home page

Interrogation Site Metadata

RSH - Ringold Springs Hatch. Outfall

Status:   Active - Non-Operational
Site Type: Instream Remote Detection System  |  Organization: Washington Dept. of Fish and Wildlife
General Operational Period: Year Round
Start Date: 4/2/2016 12:00 AM

This site is a permanent PIT tag detection system located in the Ringold Springs Hatchery outfall channel. The site is located just below the adult collection facility. The site consists of three antennas in series, installed in pass-through configuration. Each antenna spans the wetted width of the channel and is powered by a Biomark IS1001 (ACN). The ACNs are connected to a QST/Biomark QuBE ACN controller. The antennas were built and installed by WDFW. The site is connected to grid power to charge the battery bank that powers the detection system. A cellular modem is installed on site to provide remote communication and allow for automated data collection.

Current Operations

Last File Loaded: RSH-2024-356-P-005.json
Date Last File Loaded: 12/21/2024 9:00 PM
Date Last File Opened: 12/21/2024 4:41 PM
Date Last File Closed: 12/21/2024 7:41 PM
Last Observation Tag: 3DD.00775F0233
Last Observation Date: 12/21/2024 6:17 PM
Detection Summary: Last Day's Observations
Contacts

Primary Contact:

Matthew Stilwater
matthew.stilwater@dfw.wa.gov
509-664-3148

Data Steward:

Kevin Peterson
kevin.peterson@merck.com
208-484-0446
Location
Coordinates: 46.510622, -119.260909  |  River Km: 567
Operational History

Operational history describes the period the site was interrogating for PIT tags. The comments provide anecdotal information about the operation of the site during this period. Site operational periods are updated typically at the end of the calendar year.

Configuration

Configuration metadata includes details about the equipment used at the site to detect and record PIT tags. A new configuration sequence record is created when equipment is added or removed from the site and the period of time it was active. A configuration sequence without an End Date is currently active.

Select Configuration Number:
Start Date:  1/1/2016
End Date:  ----

Site Configuration Diagrams:

Equipment History

Select a type to view the history of equipment installed at this site. A missing End Date implies the information about the equipment is current.

Select Equipment Type:
Photos Not Found
Event Log Summary

No Archived Event Logs