Interrogation Site Metadata
LMC - Lower Manastash Creek
Status: Active - Operations UnspecifiedGeneral Operational Period: Year Round
Start Date: 1/28/2014 12:00 AM
LMC is located in Manastash creek 1.4 miles above the confluence to the Yakima river, 80M above the bridge at Barnes Rd. All equipment was purchased by the Kittitas County Conservation District directly from Biomark. Site was installed and will be managed by WDFW personnel. Initial configuration of the site included 3-20ft, Biomark Lite antennas, each spanning the wetted width of the creek. Antenna 1 is upstream, 2 middle, and 3 is the downstream antenna. Antennas 2 and 3 were damaged February 2016 and were replaced in February 2017 with 24 x 8 ft pass-through antennas constructed with 1 inch PEX. Ten inch posts were used on the bottom of the creek to create a backbone for the antennas. The posts are secured to the substrate with MR-4 anchors. The sides of the antennas are secured using anchors on an exposed bank, clamps on trees and one t-post for antenna 3. Antennas 2 and 3 have a complete field of detection with 24 inches of read range off the coil. Each antenna is connected to a submersible IS1001 antenna control node which are anchored to the bank. The exciter cable runs 120ft upstream along the left bank to the IS1001-MTS, secured in an enclosure. Grid power is being used to charge the 4-12V batteries located in a Jo-Box under the enclosure.
Current Operations
| Last File Loaded: | LMC-2024-127-P-001.json |
| Date Last File Loaded: | 6/4/2024 8:21 AM |
| Date Last File Opened: | 5/6/2024 7:23 AM |
| Date Last File Closed: | 6/4/2024 6:23 AM |
| Last Observation Tag: | 3DD.003E00A483 |
| Last Observation Date: | 6/3/2024 9:34 PM |
| Detection Summary: | Last Day's Observations |
Contacts
Location
Operational History
Operational history describes the period the site was interrogating for PIT tags. The comments provide anecdotal information about the operation of the site during this period. Site operational periods are updated typically at the end of the calendar year.
Configuration
Configuration metadata includes details about the equipment used at the site to detect and record PIT tags. A new configuration sequence record is created when equipment is added or removed from the site and the period of time it was active. A configuration sequence without an End Date is currently active.
Equipment History
Select a type to view the history of equipment installed at this site. A missing End Date implies the information about the equipment is current.