|
Diagnostics |
|
Status and noise reports from transceivers are parsed to pull out diagnostic values, which can then be reported as raw or aggregated values on a timeline or in a grid. The values currently processed for PTAGIS-maintained interrogation sites include:
|
Metric |
Defintion |
Domain |
|
AntennaPhase |
Antenna Phase |
integer |
|
AverageNoiseMv |
Average noise in mV |
integer |
|
CurrentNoiseMv |
Current noise in mV |
integer |
|
ExciterCurrent |
Antenna current (Ap-p). |
integer |
|
ExciterPower |
Exciter power in volts. |
decimal |
|
FdxbPeak |
Highest value encountered in the averaging period. |
percent (0.00 - 1) |
|
MaximumNoiseMv |
Maximum noise in mV |
integer |
|
NoiseAverage |
Average calculated over period of noise delay or default 10s period if noise delay is zero. |
percent (0.00 - 1) |
|
NoiseCurrent |
Current noise (%) |
percent (0.00 - 1) |
|
NoiseGain |
Relative noise gain (%) |
percent (0.00 - 1) |
|
NoisePeak |
Highest value encountered in averaging period while no tags are detected. |
percent (0.00 - 1) |
|
RelativePhase |
Relative exciter drive phase (%). |
percent (0 - 100) |
|
SignalLevel |
Signal level from amplifiers (%, B-FLT test point). |
|
|
SignalLevelMv |
FDXB Signal Level mV |
integer |
|
Temperature |
Temperature on reader analog board in degrees Celcius. |
decimal |
|
TuningCapacitor |
Tuning Capacitor |
integer |