EVENT LOG FOR SITE BCC The first line of each entry contains a date/time stamp & who is reporting. The most recent entry is listed first. Date Time Who ---------- ----- -------- 12/28/2012 14:26 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Level_Low Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading low level *** Tagname Value: Alarm Time: 27/12/2012 15:30:30, Current value: 1.000000 ALARM Action: Channel Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 12/27/2012 14:26 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Level_Low Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading low level *** Tagname Value: Alarm Time: 27/12/2012 15:30:30, Current value: 1.000000 ALARM Action: Channel Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 12/27/2012 14:26 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Active Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading enough level to deem the channel active *** Tagname Value: Alarm Time: 27/12/2012 15:30:04, Current value: 1.000000 ALARM Action: Channel Active +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 12/27/2012 14:21 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Active Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading enough level to deem the channel active *** Tagname Value: Alarm Time: 27/12/2012 15:25:28, Current value: 1.000000 ALARM Action: Channel Active +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 12/19/2012 09:05 Alan The Network cabinet UPS in the BO3/BO4 network cabinet failed at ~1330PST 12-18-2012. Dean Ballinger bypassed the failed unit at ~0845PST 12-19- 2012. The UPS will be replaced at the next opportunity. 12/06/2012 08:21 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Level_Low Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading low level *** Tagname Value: Alarm Time: 05/12/2012 09:24:58, Current value: 1.000000 ALARM Action: Channel Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 12/05/2012 08:21 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Level_Low Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading low level *** Tagname Value: Alarm Time: 05/12/2012 09:24:58, Current value: 1.000000 ALARM Action: Channel Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 12/05/2012 08:04 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Active Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading enough level to deem the channel active *** Tagname Value: Alarm Time: 05/12/2012 09:08:23, Current value: 1.000000 ALARM Action: Channel Active +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 12/01/2012 07:59 Troy Noticed that the Duty Cycle at BCC had not switched in 3 weeks. Found D2 to be down on interlocks again. Cleared the interlocks (current switch) and D2 started. PSMFC will monitor. 11/15/2012 07:49 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Level_Low Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading low level *** Tagname Value: Alarm Time: 14/11/2012 08:52:59, Current value: 1.000000 ALARM Action: Channel Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 11/14/2012 07:49 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Level_Low Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading low level *** Tagname Value: Alarm Time: 14/11/2012 08:52:59, Current value: 1.000000 ALARM Action: Channel Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 11/14/2012 07:34 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Active Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading enough level to deem the channel active *** Tagname Value: Alarm Time: 14/11/2012 08:37:06, Current value: 1.000000 ALARM Action: Channel Active +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 11/13/2012 01:14 bcc_robo Content-description: Mail message body Event on Tagname: D1_INT_Start_Req Status: ALM, Level: LVL *** Tagname Description: D1 Auto Start Request due to Interlock problems with D2 *** Tagname Value: Alarm Time: 12/11/2012 02:17:00, Current value: 1.000000 ALARM Action: Interlock problem with D2 Start Request sent to D1 +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 11/13/2012 01:14 bcc_robo Content-description: Mail message body Event on Tagname: D2_Interlocks Status: ALM, Level: LVL *** Tagname Description: D2 interlock problem indication *** Tagname Value: Alarm Time: 12/11/2012 02:17:00, Current value: 1.000000 ALARM Action: D2 interlock problem +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 11/13/2012 01:13 bcc_robo Content-description: Mail message body Event on Tagname: D2_Flow_Alarm Status: ALM, Level: LVL *** Tagname Description: D2's flow switch failed *** Tagname Value: Alarm Time: 12/11/2012 02:16:48, Current value: 1.000000 ALARM Action: D2 flow switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 11/13/2012 01:13 bcc_robo Content-description: Mail message body Event on Tagname: D2_Current_Alarm Status: ALM, Level: LVL *** Tagname Description: D2's Current switch failed *** Tagname Value: Alarm Time: 12/11/2012 02:16:45, Current value: 1.000000 ALARM Action: D2 current switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 11/12/2012 01:13 bcc_robo Content-description: Mail message body Event on Tagname: D2_Interlocks Status: ALM, Level: LVL *** Tagname Description: D2 interlock problem indication *** Tagname Value: Alarm Time: 12/11/2012 02:17:00, Current value: 1.000000 ALARM Action: D2 interlock problem +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 11/12/2012 01:13 bcc_robo Content-description: Mail message body Event on Tagname: D1_INT_Start_Req Status: ALM, Level: LVL *** Tagname Description: D1 Auto Start Request due to Interlock problems with D2 *** Tagname Value: Alarm Time: 12/11/2012 02:17:00, Current value: 1.000000 ALARM Action: Interlock problem with D2 Start Request sent to D1 +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 11/12/2012 01:13 bcc_robo Content-description: Mail message body Event on Tagname: D2_Current_Alarm Status: ALM, Level: LVL *** Tagname Description: D2's Current switch failed *** Tagname Value: Alarm Time: 12/11/2012 02:16:45, Current value: 1.000000 ALARM Action: D2 current switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 11/12/2012 01:13 bcc_robo Content-description: Mail message body Event on Tagname: D2_Flow_Alarm Status: ALM, Level: LVL *** Tagname Description: D2's flow switch failed *** Tagname Value: Alarm Time: 12/11/2012 02:16:48, Current value: 1.000000 ALARM Action: D2 flow switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 11/08/2012 16:19 Troy It was decided to cluster BCC-PC2 with the BCC-M4 machine, making BCC-M4 the Primary machine and BCC-PC2 the backup machine. This is now in place. The site configurations were exported and will be sent to the appropriate personnel for archiving. 11/08/2012 15:31 Troy BCC-M4 pc was found to have M4 in a failed state. Not much investigation was put into my M4 was failed as a upgrade was to take place. It was found that BCC-PC2 was also trying to control ARRT and it was up and running. Both machines were upgraded from M4 version 1.4.4x64 to M4 version 1.4.6x64. BCC-M4 machine was given control of ARRT and an attempt to stop BCC-PC2 from trying to access ARRT was made by putting a bogus IP address. However it looks like PC2 isn't communicating with the transceiver. PSMFC will continue to trouble shoot this problem. 10/15/2012 11:34 Troy The quarterly De-Hu checks were performed. It was noticed that the De- hu's are running right at the lower edge of the current switches sensing ability. The sensativity was adjusted on both the current and flow switches in hopes that shutdowns on interlocks will stop on D2. If they continue PSMFC will have to look into a lower ranged switch. No other problems to report. 10/15/2012 11:26 bcc_robo Content-description: Mail message body Event on Tagname: D2_Flow_Alarm Status: ALM, Level: LVL *** Tagname Description: D2's flow switch failed *** Tagname Value: Alarm Time: 15/10/2012 12:28:45, Current value: 1.000000 ALARM Action: D2 flow switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/15/2012 11:25 bcc_robo Content-description: Mail message body Event on Tagname: D2_Flow_Alarm Status: ALM, Level: LVL *** Tagname Description: D2's flow switch failed *** Tagname Value: Alarm Time: 15/10/2012 12:28:20, Current value: 1.000000 ALARM Action: D2 flow switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/15/2012 11:25 bcc_robo Content-description: Mail message body Event on Tagname: D2_Flow_Alarm Status: ALM, Level: LVL *** Tagname Description: D2's flow switch failed *** Tagname Value: Alarm Time: 15/10/2012 12:28:03, Current value: 1.000000 ALARM Action: D2 flow switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/15/2012 11:25 bcc_robo Content-description: Mail message body Event on Tagname: D2_Flow_Alarm Status: ALM, Level: LVL *** Tagname Description: D2's flow switch failed *** Tagname Value: Alarm Time: 15/10/2012 12:27:31, Current value: 1.000000 ALARM Action: D2 flow switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/15/2012 11:23 bcc_robo Content-description: Mail message body Event on Tagname: D2_Flow_Alarm Status: ALM, Level: LVL *** Tagname Description: D2's flow switch failed *** Tagname Value: Alarm Time: 15/10/2012 12:25:43, Current value: 1.000000 ALARM Action: D2 flow switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/15/2012 11:22 bcc_robo Content-description: Mail message body Event on Tagname: D2_Flow_Alarm Status: ALM, Level: LVL *** Tagname Description: D2's flow switch failed *** Tagname Value: Alarm Time: 15/10/2012 12:25:13, Current value: 1.000000 ALARM Action: D2 flow switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/15/2012 10:43 bcc_robo Content-description: Mail message body Event on Tagname: D1_INT_Start_Req Status: ALM, Level: LVL *** Tagname Description: D1 Auto Start Request due to Interlock problems with D2 *** Tagname Value: Alarm Time: 15/10/2012 11:45:45, Current value: 1.000000 ALARM Action: Interlock problem with D2 Start Request sent to D1 +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/15/2012 10:43 bcc_robo Content-description: Mail message body Event on Tagname: D2_Interlocks Status: ALM, Level: LVL *** Tagname Description: D2 interlock problem indication *** Tagname Value: Alarm Time: 15/10/2012 11:45:44, Current value: 1.000000 ALARM Action: D2 interlock problem +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/15/2012 10:42 bcc_robo Content-description: Mail message body Event on Tagname: D2_Flow_Alarm Status: ALM, Level: LVL *** Tagname Description: D2's flow switch failed *** Tagname Value: Alarm Time: 15/10/2012 11:45:30, Current value: 1.000000 ALARM Action: D2 flow switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/15/2012 10:34 bcc_robo Content-description: Mail message body Event on Tagname: D2_Current_Alarm Status: ALM, Level: LVL *** Tagname Description: D2's Current switch failed *** Tagname Value: Alarm Time: 15/10/2012 11:36:33, Current value: 1.000000 ALARM Action: D2 current switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/15/2012 10:33 bcc_robo Content-description: Mail message body Event on Tagname: D2_Current_Alarm Status: ALM, Level: LVL *** Tagname Description: D2's Current switch failed *** Tagname Value: Alarm Time: 15/10/2012 11:35:47, Current value: 1.000000 ALARM Action: D2 current switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/15/2012 10:28 bcc_robo Content-description: Mail message body Event on Tagname: D2_Interlocks Status: ALM, Level: LVL *** Tagname Description: D2 interlock problem indication *** Tagname Value: Alarm Time: 15/10/2012 11:30:54, Current value: 1.000000 ALARM Action: D2 interlock problem +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/15/2012 10:28 bcc_robo Content-description: Mail message body Event on Tagname: D1_INT_Start_Req Status: ALM, Level: LVL *** Tagname Description: D1 Auto Start Request due to Interlock problems with D2 *** Tagname Value: Alarm Time: 15/10/2012 11:30:54, Current value: 1.000000 ALARM Action: Interlock problem with D2 Start Request sent to D1 +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/15/2012 10:28 bcc_robo Content-description: Mail message body Event on Tagname: D2_Current_Alarm Status: ALM, Level: LVL *** Tagname Description: D2's Current switch failed *** Tagname Value: Alarm Time: 15/10/2012 11:30:39, Current value: 1.000000 ALARM Action: D2 current switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/15/2012 09:55 bcc_robo Content-description: Mail message body Event on Tagname: D2_Interlocks_Reset Status: ALM, Level: LVL *** Tagname Description: D2 Interlock Reset *** Tagname Value: Alarm Time: 15/10/2012 10:58:17, Current value: 1.000000 ALARM Action: D2 Interlock Reset Pressed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/09/2012 10:36 bcc_robo Content-description: Mail message body Event on Tagname: D2_Interlocks Status: ALM, Level: LVL *** Tagname Description: D2 interlock problem indication *** Tagname Value: Alarm Time: 08/10/2012 11:39:18, Current value: 1.000000 ALARM Action: D2 interlock problem +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/09/2012 10:36 bcc_robo Content-description: Mail message body Event on Tagname: D1_INT_Start_Req Status: ALM, Level: LVL *** Tagname Description: D1 Auto Start Request due to Interlock problems with D2 *** Tagname Value: Alarm Time: 08/10/2012 11:39:18, Current value: 1.000000 ALARM Action: Interlock problem with D2 Start Request sent to D1 +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/09/2012 10:36 bcc_robo Content-description: Mail message body Event on Tagname: D2_Flow_Alarm Status: ALM, Level: LVL *** Tagname Description: D2's flow switch failed *** Tagname Value: Alarm Time: 08/10/2012 11:39:05, Current value: 1.000000 ALARM Action: D2 flow switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/09/2012 10:36 bcc_robo Content-description: Mail message body Event on Tagname: D2_Current_Alarm Status: ALM, Level: LVL *** Tagname Description: D2's Current switch failed *** Tagname Value: Alarm Time: 08/10/2012 11:39:03, Current value: 1.000000 ALARM Action: D2 current switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/08/2012 10:36 bcc_robo Content-description: Mail message body Event on Tagname: D2_Interlocks Status: ALM, Level: LVL *** Tagname Description: D2 interlock problem indication *** Tagname Value: Alarm Time: 08/10/2012 11:39:18, Current value: 1.000000 ALARM Action: D2 interlock problem +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/08/2012 10:36 bcc_robo Content-description: Mail message body Event on Tagname: D1_INT_Start_Req Status: ALM, Level: LVL *** Tagname Description: D1 Auto Start Request due to Interlock problems with D2 *** Tagname Value: Alarm Time: 08/10/2012 11:39:18, Current value: 1.000000 ALARM Action: Interlock problem with D2 Start Request sent to D1 +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/08/2012 10:36 bcc_robo Content-description: Mail message body Event on Tagname: D2_Flow_Alarm Status: ALM, Level: LVL *** Tagname Description: D2's flow switch failed *** Tagname Value: Alarm Time: 08/10/2012 11:39:05, Current value: 1.000000 ALARM Action: D2 flow switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/08/2012 10:36 bcc_robo Content-description: Mail message body Event on Tagname: D2_Current_Alarm Status: ALM, Level: LVL *** Tagname Description: D2's Current switch failed *** Tagname Value: Alarm Time: 08/10/2012 11:39:03, Current value: 1.000000 ALARM Action: D2 current switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/08/2012 10:31 bcc_robo Content-description: Mail message body Event on Tagname: D2_Current_Alarm Status: ALM, Level: LVL *** Tagname Description: D2's Current switch failed *** Tagname Value: Alarm Time: 08/10/2012 11:33:54, Current value: 1.000000 ALARM Action: D2 current switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/08/2012 10:31 bcc_robo Content-description: Mail message body Event on Tagname: D2_Flow_Alarm Status: ALM, Level: LVL *** Tagname Description: D2's flow switch failed *** Tagname Value: Alarm Time: 08/10/2012 11:33:54, Current value: 1.000000 ALARM Action: D2 flow switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/08/2012 10:29 bcc_robo Content-description: Mail message body Event on Tagname: D2_Interlocks_Reset Status: ALM, Level: LVL *** Tagname Description: D2 Interlock Reset *** Tagname Value: Alarm Time: 08/10/2012 11:32:04, Current value: 1.000000 ALARM Action: D2 Interlock Reset Pressed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/08/2012 10:23 bcc_robo Content-description: Mail message body Event on Tagname: D2_Interlocks Status: ALM, Level: LVL *** Tagname Description: D2 interlock problem indication *** Tagname Value: Alarm Time: 08/10/2012 11:26:18, Current value: 1.000000 ALARM Action: D2 interlock problem +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/08/2012 10:23 bcc_robo Content-description: Mail message body Event on Tagname: D1_INT_Start_Req Status: ALM, Level: LVL *** Tagname Description: D1 Auto Start Request due to Interlock problems with D2 *** Tagname Value: Alarm Time: 08/10/2012 11:26:18, Current value: 1.000000 ALARM Action: Interlock problem with D2 Start Request sent to D1 +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/08/2012 10:23 bcc_robo Content-description: Mail message body Event on Tagname: D2_Flow_Alarm Status: ALM, Level: LVL *** Tagname Description: D2's flow switch failed *** Tagname Value: Alarm Time: 08/10/2012 11:26:04, Current value: 1.000000 ALARM Action: D2 flow switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/08/2012 10:23 bcc_robo Content-description: Mail message body Event on Tagname: D2_Current_Alarm Status: ALM, Level: LVL *** Tagname Description: D2's Current switch failed *** Tagname Value: Alarm Time: 08/10/2012 11:26:03, Current value: 1.000000 ALARM Action: D2 current switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/08/2012 10:12 bcc_robo Content-description: Mail message body Event on Tagname: D2_Interlocks_Reset Status: ALM, Level: LVL *** Tagname Description: D2 Interlock Reset *** Tagname Value: Alarm Time: 08/10/2012 11:14:23, Current value: 1.000000 ALARM Action: D2 Interlock Reset Pressed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/07/2012 19:44 bcc_robo Content-description: Mail message body Event on Tagname: D2_Interlocks Status: ALM, Level: LVL *** Tagname Description: D2 interlock problem indication *** Tagname Value: Alarm Time: 07/10/2012 20:46:44, Current value: 1.000000 ALARM Action: D2 interlock problem +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/07/2012 19:44 bcc_robo Content-description: Mail message body Event on Tagname: D1_INT_Start_Req Status: ALM, Level: LVL *** Tagname Description: D1 Auto Start Request due to Interlock problems with D2 *** Tagname Value: Alarm Time: 07/10/2012 20:46:44, Current value: 1.000000 ALARM Action: Interlock problem with D2 Start Request sent to D1 +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/07/2012 19:44 bcc_robo Content-description: Mail message body Event on Tagname: D2_Flow_Alarm Status: ALM, Level: LVL *** Tagname Description: D2's flow switch failed *** Tagname Value: Alarm Time: 07/10/2012 20:46:31, Current value: 1.000000 ALARM Action: D2 flow switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 10/07/2012 19:44 bcc_robo Content-description: Mail message body Event on Tagname: D2_Current_Alarm Status: ALM, Level: LVL *** Tagname Description: D2's Current switch failed *** Tagname Value: Alarm Time: 07/10/2012 20:46:29, Current value: 1.000000 ALARM Action: D2 current switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 09/21/2012 07:14 PTOC_Bot CenturyLink reports they are currently experiencing an outage, the estimated return to service is no later than 16:00 PDT 9-21-2012. 09/20/2012 08:41 Troy The D2 unit tripped on interlocks again yesterday. The interlocks were re- set today via the web port and D2 was re-started and it started without incident. PSMFC will continue to monitor and if it trips on interlocks again PSMFC will consider changing out the current switch. 09/20/2012 07:41 bcc_robo Content-description: Mail message body Event on Tagname: D2_Interlocks_Reset Status: ALM, Level: LVL *** Tagname Description: D2 Interlock Reset *** Tagname Value: Alarm Time: 20/09/2012 08:43:26, Current value: 1.000000 ALARM Action: D2 Interlock Reset Pressed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 09/20/2012 06:21 bcc_robo Content-description: Mail message body Event on Tagname: D2_Interlocks Status: ALM, Level: LVL *** Tagname Description: D2 interlock problem indication *** Tagname Value: Alarm Time: 19/09/2012 07:23:23, Current value: 1.000000 ALARM Action: D2 interlock problem +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 09/20/2012 06:21 bcc_robo Content-description: Mail message body Event on Tagname: D1_INT_Start_Req Status: ALM, Level: LVL *** Tagname Description: D1 Auto Start Request due to Interlock problems with D2 *** Tagname Value: Alarm Time: 19/09/2012 07:23:23, Current value: 1.000000 ALARM Action: Interlock problem with D2 Start Request sent to D1 +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 09/20/2012 06:21 bcc_robo Content-description: Mail message body Event on Tagname: D2_Flow_Alarm Status: ALM, Level: LVL *** Tagname Description: D2's flow switch failed *** Tagname Value: Alarm Time: 19/09/2012 07:23:10, Current value: 1.000000 ALARM Action: D2 flow switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 09/20/2012 06:21 bcc_robo Content-description: Mail message body Event on Tagname: D2_Current_Alarm Status: ALM, Level: LVL *** Tagname Description: D2's Current switch failed *** Tagname Value: Alarm Time: 19/09/2012 07:23:08, Current value: 1.000000 ALARM Action: D2 current switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 09/19/2012 06:21 bcc_robo Content-description: Mail message body Event on Tagname: D2_Interlocks Status: ALM, Level: LVL *** Tagname Description: D2 interlock problem indication *** Tagname Value: Alarm Time: 19/09/2012 07:23:23, Current value: 1.000000 ALARM Action: D2 interlock problem +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 09/19/2012 06:21 bcc_robo Content-description: Mail message body Event on Tagname: D1_INT_Start_Req Status: ALM, Level: LVL *** Tagname Description: D1 Auto Start Request due to Interlock problems with D2 *** Tagname Value: Alarm Time: 19/09/2012 07:23:23, Current value: 1.000000 ALARM Action: Interlock problem with D2 Start Request sent to D1 +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 09/19/2012 06:21 bcc_robo Content-description: Mail message body Event on Tagname: D2_Flow_Alarm Status: ALM, Level: LVL *** Tagname Description: D2's flow switch failed *** Tagname Value: Alarm Time: 19/09/2012 07:23:10, Current value: 1.000000 ALARM Action: D2 flow switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 09/19/2012 06:21 bcc_robo Content-description: Mail message body Event on Tagname: D2_Current_Alarm Status: ALM, Level: LVL *** Tagname Description: D2's Current switch failed *** Tagname Value: Alarm Time: 19/09/2012 07:23:08, Current value: 1.000000 ALARM Action: D2 current switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 09/18/2012 08:51 Alan Site personnel confirm that the corner collector was taken out of service for the season 9/16/2012 at 00:11:23 PDT. 09/16/2012 23:09 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Level_Low Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading low level *** Tagname Value: Alarm Time: 16/09/2012 00:11:23, Current value: 1.000000 ALARM Action: Channel Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 09/16/2012 06:45 Troy The level transmitters report the channel shutting down at: A Level transmitter is reading low level *** Tagname Value: Alarm Time: 16/09/2012 00:11:23, Current value: 1.000000 ALARM Action: Channel Level Low PSMFC will confirm tomorrow with site personnel. 09/15/2012 23:09 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Level_Low Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading low level *** Tagname Value: Alarm Time: 16/09/2012 00:11:23, Current value: 1.000000 ALARM Action: Channel Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 09/15/2012 23:09 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Active Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading enough level to deem the channel active *** Tagname Value: Alarm Time: 16/09/2012 00:11:03, Current value: 1.000000 ALARM Action: Channel Active +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 09/05/2012 13:52 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Active Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading enough level to deem the channel active *** Tagname Value: Alarm Time: 04/09/2012 14:54:47, Current value: 1.000000 ALARM Action: Channel Active +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 09/04/2012 13:52 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Active Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading enough level to deem the channel active *** Tagname Value: Alarm Time: 04/09/2012 14:54:47, Current value: 1.000000 ALARM Action: Channel Active +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 09/04/2012 07:32 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Level_Low Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading low level *** Tagname Value: Alarm Time: 04/09/2012 08:34:44, Current value: 1.000000 ALARM Action: Channel Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 09/01/2012 19:35 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Level_High Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading High level *** Tagname Value: Alarm Time: 31/08/2012 20:37:05, Current value: 1.000000 ALARM Action: Channel Level High +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 08/31/2012 19:35 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Level_High Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading High level *** Tagname Value: Alarm Time: 31/08/2012 20:37:05, Current value: 1.000000 ALARM Action: Channel Level High +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 08/31/2012 07:37 Scott_Li FYI, The project wants to shut down the reader on 9/4 at ~ 1000 hrs for a walk through with the contractors who will be doing the repair work on the channel. Asked the project to coordinate with us on shutting down the reader. Should only be down for a couple of hrs. The repairs on the channel are scheduled to commence on 9/15. Scott Livingston Sr. Engineering Technician PSMFC-PTAGIS 7103 W. Clearwater Ave. Suite H. Kennewick, Wa. 99336 Office: 509.735.2773 x.2 Mobile: 509.539.0894 Scottl@psmfc.org 08/24/2012 16:55 bcc_robo Content-description: Mail message body Event on Tagname: RH_Level_Low Status: ALM, Level: LVL *** Tagname Description: A RH transmitter is reading Low RH *** Tagname Value: Alarm Time: 23/08/2012 17:57:23, Current value: 1.000000 ALARM Action: RH Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 08/23/2012 16:55 bcc_robo Content-description: Mail message body Event on Tagname: RH_Level_Low Status: ALM, Level: LVL *** Tagname Description: A RH transmitter is reading Low RH *** Tagname Value: Alarm Time: 23/08/2012 17:57:23, Current value: 1.000000 ALARM Action: RH Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 08/21/2012 15:21 Scott_Li FYI.. System will be dewatered on Sept 4th for channel inspection, then possibly back up until the 14th Sept. After that , the channel should remain closed until march of 2013. Periodic opening of the channel may occur for debris passage or other circumstances. Scheduled meeting with Jon R. from Portland district on or around Sept. 15th to inspect the skid plate sealant installed last year. 08/18/2012 18:16 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_ON Status: ALM, Level: LVL *** Tagname Description: AC Power restored alarm *** Tagname Value: Alarm Time: 17/08/2012 19:18:07, Current value: 1.000000 ALARM Action: AC Power On +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 08/18/2012 18:15 bcc_robo Content-description: Mail message body Event on Tagname: D2_Auto Status: ALM, Level: LVL *** Tagname Description: D2 in Auto *** Tagname Value: Alarm Time: 17/08/2012 19:17:18, Current value: 1.000000 ALARM Action: D2 in Auto +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 08/18/2012 18:15 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Active Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading enough level to deem the channel active *** Tagname Value: Alarm Time: 17/08/2012 19:17:18, Current value: 1.000000 ALARM Action: Channel Active +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 08/18/2012 18:15 bcc_robo Content-description: Mail message body Event on Tagname: D1_Auto Status: ALM, Level: LVL *** Tagname Description: D1 in Auto *** Tagname Value: Alarm Time: 17/08/2012 19:17:18, Current value: 1.000000 ALARM Action: D1 in Auto +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 08/17/2012 18:16 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_ON Status: ALM, Level: LVL *** Tagname Description: AC Power restored alarm *** Tagname Value: Alarm Time: 17/08/2012 19:18:07, Current value: 1.000000 ALARM Action: AC Power On +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 08/17/2012 18:15 bcc_robo Content-description: Mail message body Event on Tagname: D2_Auto Status: ALM, Level: LVL *** Tagname Description: D2 in Auto *** Tagname Value: Alarm Time: 17/08/2012 19:17:18, Current value: 1.000000 ALARM Action: D2 in Auto +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 08/17/2012 18:15 bcc_robo Content-description: Mail message body Event on Tagname: D1_Auto Status: ALM, Level: LVL *** Tagname Description: D1 in Auto *** Tagname Value: Alarm Time: 17/08/2012 19:17:18, Current value: 1.000000 ALARM Action: D1 in Auto +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 08/17/2012 18:15 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Active Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading enough level to deem the channel active *** Tagname Value: Alarm Time: 17/08/2012 19:17:18, Current value: 1.000000 ALARM Action: Channel Active +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 08/17/2012 18:15 bcc_robo Content-description: Mail message body Event on Tagname: Temperature_Low Status: ALM, Level: LVL *** Tagname Description: A Temperature transmitter is reading Low temp *** Tagname Value: Alarm Time: 17/08/2012 19:17:18, Current value: 1.000000 ALARM Action: Temperature High +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 08/17/2012 18:15 bcc_robo Content-description: Mail message body Event on Tagname: RH_Level_Low Status: ALM, Level: LVL *** Tagname Description: A RH transmitter is reading Low RH *** Tagname Value: Alarm Time: 17/08/2012 19:17:18, Current value: 1.000000 ALARM Action: RH Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 08/17/2012 18:15 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Level_Low Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading low level *** Tagname Value: Alarm Time: 17/08/2012 19:17:18, Current value: 1.000000 ALARM Action: Channel Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 08/17/2012 18:10 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_ON Status: ALM, Level: LVL *** Tagname Description: AC Power restored alarm *** Tagname Value: Alarm Time: 17/08/2012 19:12:21, Current value: 1.000000 ALARM Action: AC Power On +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 08/17/2012 18:10 bcc_robo Content-description: Mail message body Event on Tagname: RH_Level_Low Status: ALM, Level: LVL *** Tagname Description: A RH transmitter is reading Low RH *** Tagname Value: Alarm Time: 17/08/2012 19:11:32, Current value: 1.000000 ALARM Action: RH Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 08/17/2012 18:10 bcc_robo Content-description: Mail message body Event on Tagname: D2_Auto Status: ALM, Level: LVL *** Tagname Description: D2 in Auto *** Tagname Value: Alarm Time: 17/08/2012 19:11:32, Current value: 1.000000 ALARM Action: D2 in Auto +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 08/17/2012 18:10 bcc_robo Content-description: Mail message body Event on Tagname: D1_Auto Status: ALM, Level: LVL *** Tagname Description: D1 in Auto *** Tagname Value: Alarm Time: 17/08/2012 19:11:32, Current value: 1.000000 ALARM Action: D1 in Auto +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 08/17/2012 18:10 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Active Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading enough level to deem the channel active *** Tagname Value: Alarm Time: 17/08/2012 19:11:32, Current value: 1.000000 ALARM Action: Channel Active +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 08/17/2012 18:10 bcc_robo Content-description: Mail message body Event on Tagname: Temperature_Low Status: ALM, Level: LVL *** Tagname Description: A Temperature transmitter is reading Low temp *** Tagname Value: Alarm Time: 17/08/2012 19:11:32, Current value: 1.000000 ALARM Action: Temperature High +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 08/17/2012 18:10 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Level_Low Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading low level *** Tagname Value: Alarm Time: 17/08/2012 19:11:32, Current value: 1.000000 ALARM Action: Channel Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 08/08/2012 10:47 Roger Performed site GMC on 8/8/2012. The transceiver was checked for tune and no adjustments were made. Static AART read range is -5" and dynamic testing is at approx -12" to -13". The FDXB level is at approx. 100mV. The hits per tag is currently between 4 and 8. There are no problems to report. 08/02/2012 10:18 Roger Performed on-site GMC on 8/2/2012. Reader was checked for tuning. The current static read range is -6 and dynamic is approx. -19 to -10. No improvement could be made. The FDXB signal level is approx 100mV. The hits per tag is between 5 and 9. No problems to report. 07/31/2012 10:52 bcc_robo Content-description: Mail message body Event on Tagname: D2_Auto Status: ALM, Level: LVL *** Tagname Description: D2 in Auto *** Tagname Value: Alarm Time: 30/07/2012 11:54:08, Current value: 1.000000 ALARM Action: D2 in Auto +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 07/30/2012 12:12 Troy At the site to determine why D2 failed on interlocks last week. I open the unit and inspected all moving parts then started the unit in Hand. The unit started fine. I shut the unit down and took the fan off to check the bearings. The fan spins freely. I put the current probe on the unit and it is running at about the same current as D1. There is no obvious cause to the interlock shutdown of D2. D2 was turned on and left to run while I did a quick GMC on the ARRT unit. The cover was taken off, excess oil and plastic chips were cleaned up and oil was added to the oil pads. The unit was ran in and out several times and hand checked for vibrations. All appears to be running well and smooth. The unit was closed up and the time between test was put back to normal. The HVAC filters were inspected and both look fine. PSMFC will continue to monitor the health of the De-humidification system. No problems to report at this time. 07/30/2012 11:55 bcc_robo Content-description: Mail message body Event on Tagname: D2_Interlocks_Reset Status: ALM, Level: LVL *** Tagname Description: D2 Interlock Reset *** Tagname Value: Alarm Time: 30/07/2012 12:57:01, Current value: 1.000000 ALARM Action: D2 Interlock Reset Pressed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 07/30/2012 10:52 bcc_robo Content-description: Mail message body Event on Tagname: D2_Auto Status: ALM, Level: LVL *** Tagname Description: D2 in Auto *** Tagname Value: Alarm Time: 30/07/2012 11:54:08, Current value: 1.000000 ALARM Action: D2 in Auto +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 07/30/2012 10:51 bcc_robo Content-description: Mail message body Event on Tagname: D2_Flow_Alarm Status: ALM, Level: LVL *** Tagname Description: D2's flow switch failed *** Tagname Value: Alarm Time: 30/07/2012 11:52:42, Current value: 1.000000 ALARM Action: D2 flow switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 07/30/2012 10:47 bcc_robo Content-description: Mail message body Event on Tagname: D2_Flow_Alarm Status: ALM, Level: LVL *** Tagname Description: D2's flow switch failed *** Tagname Value: Alarm Time: 30/07/2012 11:48:28, Current value: 1.000000 ALARM Action: D2 flow switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 07/30/2012 10:47 bcc_robo Content-description: Mail message body Event on Tagname: D2_Return_Alarm Status: ALM, Level: LVL *** Tagname Description: D2 Return Air Damper failed *** Tagname Value: Alarm Time: 30/07/2012 11:48:28, Current value: 1.000000 ALARM Action: d2 return air damper failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 07/30/2012 10:47 bcc_robo Content-description: Mail message body Event on Tagname: D2_Intake_Alarm Status: ALM, Level: LVL *** Tagname Description: D2 Intake Air Damper failed *** Tagname Value: Alarm Time: 30/07/2012 11:48:28, Current value: 1.000000 ALARM Action: d2 intake damper failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 07/30/2012 10:47 bcc_robo Content-description: Mail message body Event on Tagname: D2_Hand Status: ALM, Level: LVL *** Tagname Description: D2 in Hand *** Tagname Value: Alarm Time: 30/07/2012 11:48:28, Current value: 1.000000 ALARM Action: D2 in Hand +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 07/30/2012 10:37 bcc_robo Content-description: Mail message body Event on Tagname: D2_Flow_Alarm Status: ALM, Level: LVL *** Tagname Description: D2's flow switch failed *** Tagname Value: Alarm Time: 30/07/2012 11:39:03, Current value: 1.000000 ALARM Action: D2 flow switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 07/30/2012 10:37 bcc_robo Content-description: Mail message body Event on Tagname: D2_Return_Alarm Status: ALM, Level: LVL *** Tagname Description: D2 Return Air Damper failed *** Tagname Value: Alarm Time: 30/07/2012 11:39:03, Current value: 1.000000 ALARM Action: d2 return air damper failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 07/30/2012 10:37 bcc_robo Content-description: Mail message body Event on Tagname: D2_Intake_Alarm Status: ALM, Level: LVL *** Tagname Description: D2 Intake Air Damper failed *** Tagname Value: Alarm Time: 30/07/2012 11:39:03, Current value: 1.000000 ALARM Action: d2 intake damper failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 07/30/2012 10:37 bcc_robo Content-description: Mail message body Event on Tagname: D2_Hand Status: ALM, Level: LVL *** Tagname Description: D2 in Hand *** Tagname Value: Alarm Time: 30/07/2012 11:39:03, Current value: 1.000000 ALARM Action: D2 in Hand +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 07/28/2012 15:56 Troy D2 shutdown on interlock problem. Both the current switch and the flow switch reported as interlock problem. D1 started as it should. Psmfc will have someone on site to investigate D2 early next week. 07/27/2012 16:07 bcc_robo Content-description: Mail message body Event on Tagname: D2_Interlocks Status: ALM, Level: LVL *** Tagname Description: D2 interlock problem indication *** Tagname Value: Alarm Time: 27/07/2012 17:08:47, Current value: 1.000000 ALARM Action: D2 interlock problem +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 07/27/2012 16:07 bcc_robo Content-description: Mail message body Event on Tagname: D1_INT_Start_Req Status: ALM, Level: LVL *** Tagname Description: D1 Auto Start Request due to Interlock problems with D2 *** Tagname Value: Alarm Time: 27/07/2012 17:08:47, Current value: 1.000000 ALARM Action: Interlock problem with D2 Start Request sent to D1 +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 07/27/2012 16:07 bcc_robo Content-description: Mail message body Event on Tagname: D2_Flow_Alarm Status: ALM, Level: LVL *** Tagname Description: D2's flow switch failed *** Tagname Value: Alarm Time: 27/07/2012 17:08:33, Current value: 1.000000 ALARM Action: D2 flow switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 07/27/2012 16:07 bcc_robo Content-description: Mail message body Event on Tagname: D2_Current_Alarm Status: ALM, Level: LVL *** Tagname Description: D2's Current switch failed *** Tagname Value: Alarm Time: 27/07/2012 17:08:32, Current value: 1.000000 ALARM Action: D2 current switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 07/26/2012 10:13 bcc_robo Content-description: Mail message body Event on Tagname: D1_Interlocks Status: ALM, Level: LVL *** Tagname Description: D1 interlock problem indication *** Tagname Value: Alarm Time: 25/07/2012 11:14:40, Current value: 1.000000 ALARM Action: D1 interlock problem +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 07/26/2012 10:13 bcc_robo Content-description: Mail message body Event on Tagname: D2_INT_Start_Req Status: ALM, Level: LVL *** Tagname Description: D2 Auto Start Request due to Interlock problems with D1 *** Tagname Value: Alarm Time: 25/07/2012 11:14:40, Current value: 1.000000 ALARM Action: Interlock problem with D1 Start Request sent to D2 +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 07/26/2012 10:13 bcc_robo Content-description: Mail message body Event on Tagname: D1_Flow_Alarm Status: ALM, Level: LVL *** Tagname Description: D1's flow switch failed *** Tagname Value: Alarm Time: 25/07/2012 11:14:25, Current value: 1.000000 ALARM Action: D1 flow switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 07/25/2012 10:32 Roger Performed site GMC on 7/25/2012. The BCC reader was checked for tuning. The static ARRT read range was -6". The dynamic read range was -12. The FDXB signal level is approx -12". The Dehu maintenance check was performed. There were no problems found. 07/25/2012 10:13 bcc_robo Content-description: Mail message body Event on Tagname: D1_Interlocks Status: ALM, Level: LVL *** Tagname Description: D1 interlock problem indication *** Tagname Value: Alarm Time: 25/07/2012 11:14:40, Current value: 1.000000 ALARM Action: D1 interlock problem +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 07/25/2012 10:13 bcc_robo Content-description: Mail message body Event on Tagname: D2_INT_Start_Req Status: ALM, Level: LVL *** Tagname Description: D2 Auto Start Request due to Interlock problems with D1 *** Tagname Value: Alarm Time: 25/07/2012 11:14:40, Current value: 1.000000 ALARM Action: Interlock problem with D1 Start Request sent to D2 +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 07/25/2012 10:13 bcc_robo Content-description: Mail message body Event on Tagname: D1_Flow_Alarm Status: ALM, Level: LVL *** Tagname Description: D1's flow switch failed *** Tagname Value: Alarm Time: 25/07/2012 11:14:25, Current value: 1.000000 ALARM Action: D1 flow switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 07/23/2012 14:32 Troy A new version of M4 was loaded, the PLC program modified and testing was conducted with good results. It was noted that the hard drive for PC2 was making a loud noise. Re- booting didn't help. I shut down the PC and brought it back up and all is quiet again. It should be noted that Minimon didn't come up like it should. PSMFC will have to keep an eye on this. 07/20/2012 06:29 Troy The ARRT program was modified so that it is now ready for the new M4 program than only set a bit but does not re-set the bit. This new M4 program will be loaded next week. Several tests were ran to prove out the logic in the PLC. 07/10/2012 10:42 Roger Performed site GMC on 7/10/2012. The transceiver was checked for ARRT tag detection. It currently has a static read range of -6 and a dynamic range of about -16. The transceiver is currently reading tags at approx. 5 to 7 hits per tag. PCAnywhere was installed on the utility PC. There are no problems to report. 07/06/2012 10:25 scottl Changed DNS entries on all data collection computers including the utility pc's in prep for the network change over and as requested by Todd and Chris. Checked the RR with ARRT, manual RR test was at -2 auto RR test was at -12. While performing a manual test, received a "Over Travel" alarm. It appears that ARRT may be sending false negatives. ARRT needs to be evaluated for consistency. ARRT automated test results do not appear to be completely indicitive of the readers performance. No adjustments made. 06/27/2012 09:44 Roger Performed site GMC on 6/27/2012. The ARRT read range is currently between -10 and -16. The hits per tag is at around 6 to 7. The FDXB level is at approx 100 mV. There are no problems to report. 06/19/2012 09:48 Roger Performed site GMC on 6/19/2012. The transceiver was checked for tuning. The ARRT static read range is -6". The automatic ARRT test reads at approx -15". The hits per tag for fish is between 5 and 10. The FDXB signal level is currently at approx 100mV. There are no problems to report. 06/14/2012 09:56 Roger Performed site GMC on 6/14/2012. ARRT is currently reading at -16". Reads per tagged fish is currently in the 4 to 7 hits per tag range. The B- filter signal level is at approx. 100mV. Transceiver was not tuned because it seems to be reading tags without any issues. Files on PC2 were archived. There are no problems to report. 06/11/2012 12:24 scottl Tried a few things on the reader that was discovered in the lab, switched the 500 pF cap in and out of circuit, re-adjusted C3. RR when before adjustments was -6 from BL and now at -4 from BL. Adjustments made yielded slight improvement for the time being. Hit per fish tags are around 5 to 8 06/07/2012 10:38 Roger Performed site GMC on 6/7/2012. Transceiver was tuned to improve ARRT detection range. ARRT was reading at approx. -20" and is now reading at approx -10". Only saw one fish go through during visit and it had 3 hits. There are no problems to report. 06/01/2012 09:51 Roger Performed site GMC on 6/1/2012. Adjusted transceiver for better ARRT performance. ARTT read range is at approx -12.5 inches. The B filter level is at approx 180 mV. Hits per tag are at a range of 2 to 8. Files on PC2 were archived. There are no problems to report. 05/30/2012 07:40 Alan The M4 PC used for ARRT was changed to a solid state hard drive/64bit machine 5-29-2012. 05/24/2012 10:05 Roger Performed site GMC on 5/24/2012. The transceiver FDXB level was checked and is at around 150 mV. The ARRT test is reading tags in the -18 to -20 range. I didn't tune the transceiver because it appears to be reading tagged fish at around 2 to 8 hits per tag. Dropped off the spare reader in the PIT tag room. Installed missing hinge pin in currently installed reader. There are no problems to report. 05/21/2012 14:33 Troy The previous pitevent was meant for GRJ. Please ignore. 05/21/2012 14:24 Troy The time open on the 2-Way tag was adjusted from 130 to 100 to try and reduce the by-catch in the SbyC tanks. 05/21/2012 12:36 scottl Traveled to site to check on transceiver performance. When arrived, RR on ARRT was -16 and all over the map. Manual walk in on ARRT the RR was -7 which is about the best that has been achieved in the last month. Retuned the entire reader and ended up at the same -7 RR as initially observed. Fish tags coming through the facility are hitting at 3 to 12 hits per tag. Also, periodically, a automated ARRT test would indicate that the tag was not read but would be observed in Minimon as being detected 2 to 3 times. That appears to be an issue. Should focus some effort in ensuring ARRT is not causing false negatives. 05/21/2012 12:25 Alan Tag mask 3D9.1C2E was added to the spurious tag filter 5-21-2012. File BCC12142.SPT includes all detections with that tag mask prior to the change. 05/20/2012 23:04 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Level_High Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading High level *** Tagname Value: Alarm Time: 19/05/2012 23:19:39, Current value: 1.000000 ALARM Action: Channel Level High +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 05/19/2012 23:04 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Level_High Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading High level *** Tagname Value: Alarm Time: 19/05/2012 23:19:39, Current value: 1.000000 ALARM Action: Channel Level High +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 05/19/2012 09:15 scottl Site is running well but the cap position graph is not working for some reason. Hits per tag are good and the fish numbers are in align with the B2J. Will monitor 05/18/2012 11:59 Darren PSMFC was on site to replace the transceiver.This was done to try and improve the reading efficiency of the ARRT tag. the PITtag efficiency has been great and the hits per tag has been on average of 2-4. We will monitor this for any improvements to these fields. the serial number of the current reader is 0002. 05/17/2012 11:26 Roger Performed site GMC on 5/17/2012. Upon arrival, the ARRT test wasn't reading at all. Spent some time trying to tune. The overall signal level looks OK. But, there is a lot of noise spikes in the signal and an occasional burst of noise. I wasn't able to get the ARRT test to pass consistantly. It will occasionally read at around -12 to -15 inches. The transceiver is reading tagged fish between 4 and 8 hits per tag. 05/14/2012 11:51 Scott_Li System was out of tune when arrived, ~ 350 400 mV noise floor. Retuned auto tuning cap C-3 and reduced noise to under 200 mV. Static RR test is at -1 from baseline and auto test is at -6 -10 roughly. PIT tag hits per tag are anywhere from 6 to 10 hits per tag. 05/12/2012 12:03 bcc_robo Content-description: Mail message body Event on Tagname: RH_Level_Low Status: ALM, Level: LVL *** Tagname Description: A RH transmitter is reading Low RH *** Tagname Value: Alarm Time: 11/05/2012 12:18:34, Current value: 1.000000 ALARM Action: RH Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 05/11/2012 12:03 bcc_robo Content-description: Mail message body Event on Tagname: RH_Level_Low Status: ALM, Level: LVL *** Tagname Description: A RH transmitter is reading Low RH *** Tagname Value: Alarm Time: 11/05/2012 12:18:34, Current value: 1.000000 ALARM Action: RH Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 05/08/2012 14:58 Darren PSMFC was on site today to replace the ARRT tag. The tag was replaced and M4 was reconfigured with the new code. The noise was at 400mV pk-pk when the system was first checked. The transceiver was re-tuned and the noise level with no tag in the field is 200mV pk-pk. The hits per tag have been averaging around 6-7 since the re-tune and the ARRT tag is being detected at a +3" when walking the tag into the field. 04/25/2012 10:54 scottl System is running as well as to be expected. ARRT RR is at -6, actual fish moving through the system are hitting at 5 to 8 hits per tag. No adjustments made to the reader. Installed Tripplite UPS on platform. No problems to report. 04/25/2012 10:11 bcc_robo Content-description: Mail message body Event on Tagname: D2_Interlocks Status: ALM, Level: LVL *** Tagname Description: D2 interlock problem indication *** Tagname Value: Alarm Time: 25/04/2012 10:24:09, Current value: 1.000000 ALARM Action: D2 interlock problem +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 04/25/2012 10:10 bcc_robo Content-description: Mail message body Event on Tagname: D1_INT_Start_Req Status: ALM, Level: LVL *** Tagname Description: D1 Auto Start Request due to Interlock problems with D2 *** Tagname Value: Alarm Time: 25/04/2012 10:24:09, Current value: 1.000000 ALARM Action: Interlock problem with D2 Start Request sent to D1 +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 04/25/2012 10:10 bcc_robo Content-description: Mail message body Event on Tagname: D2_Flow_Alarm Status: ALM, Level: LVL *** Tagname Description: D2's flow switch failed *** Tagname Value: Alarm Time: 25/04/2012 10:23:54, Current value: 1.000000 ALARM Action: D2 flow switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 04/17/2012 09:44 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_ON Status: ALM, Level: LVL *** Tagname Description: AC Power restored alarm *** Tagname Value: Alarm Time: 16/04/2012 09:59:06, Current value: 1.000000 ALARM Action: AC Power On +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 04/17/2012 09:43 bcc_robo Content-description: Mail message body Event on Tagname: D2_Auto Status: ALM, Level: LVL *** Tagname Description: D2 in Auto *** Tagname Value: Alarm Time: 16/04/2012 09:58:17, Current value: 1.000000 ALARM Action: D2 in Auto +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 04/17/2012 09:43 bcc_robo Content-description: Mail message body Event on Tagname: D1_Auto Status: ALM, Level: LVL *** Tagname Description: D1 in Auto *** Tagname Value: Alarm Time: 16/04/2012 09:58:17, Current value: 1.000000 ALARM Action: D1 in Auto +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 04/17/2012 09:43 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Active Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading enough level to deem the channel active *** Tagname Value: Alarm Time: 16/04/2012 09:58:17, Current value: 1.000000 ALARM Action: Channel Active +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 04/16/2012 09:44 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_ON Status: ALM, Level: LVL *** Tagname Description: AC Power restored alarm *** Tagname Value: Alarm Time: 16/04/2012 09:59:06, Current value: 1.000000 ALARM Action: AC Power On +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 04/16/2012 09:43 bcc_robo Content-description: Mail message body Event on Tagname: D2_Auto Status: ALM, Level: LVL *** Tagname Description: D2 in Auto *** Tagname Value: Alarm Time: 16/04/2012 09:58:17, Current value: 1.000000 ALARM Action: D2 in Auto +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 04/16/2012 09:43 bcc_robo Content-description: Mail message body Event on Tagname: D1_Auto Status: ALM, Level: LVL *** Tagname Description: D1 in Auto *** Tagname Value: Alarm Time: 16/04/2012 09:58:17, Current value: 1.000000 ALARM Action: D1 in Auto +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 04/16/2012 09:43 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Active Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading enough level to deem the channel active *** Tagname Value: Alarm Time: 16/04/2012 09:58:17, Current value: 1.000000 ALARM Action: Channel Active +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 04/16/2012 09:43 bcc_robo Content-description: Mail message body Event on Tagname: Temperature_Low Status: ALM, Level: LVL *** Tagname Description: A Temperature transmitter is reading Low temp *** Tagname Value: Alarm Time: 16/04/2012 09:58:17, Current value: 1.000000 ALARM Action: Temperature High +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 04/16/2012 09:43 bcc_robo Content-description: Mail message body Event on Tagname: RH_Level_Low Status: ALM, Level: LVL *** Tagname Description: A RH transmitter is reading Low RH *** Tagname Value: Alarm Time: 16/04/2012 09:58:17, Current value: 1.000000 ALARM Action: RH Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 04/16/2012 09:43 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Level_Low Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading low level *** Tagname Value: Alarm Time: 16/04/2012 09:58:17, Current value: 1.000000 ALARM Action: Channel Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 04/15/2012 09:16 scottl Reader noise is elevated, will reduce and retune on Monday 04/11/2012 11:58 bcc_robo Content-description: Mail message body Event on Tagname: AC_POWER_ON Status: ALM, Level: LVL *** Tagname Description: AC Power restored alarm *** Tagname Value: Alarm Time: 11/04/2012 12:13:06, Current value: 1.000000 ALARM Action: AC Power On +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 04/11/2012 11:57 bcc_robo Content-description: Mail message body Event on Tagname: D2_Auto Status: ALM, Level: LVL *** Tagname Description: D2 in Auto *** Tagname Value: Alarm Time: 11/04/2012 12:12:17, Current value: 1.000000 ALARM Action: D2 in Auto +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 04/11/2012 11:57 bcc_robo Content-description: Mail message body Event on Tagname: D1_Auto Status: ALM, Level: LVL *** Tagname Description: D1 in Auto *** Tagname Value: Alarm Time: 11/04/2012 12:12:17, Current value: 1.000000 ALARM Action: D1 in Auto +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 04/11/2012 11:57 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Active Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading enough level to deem the channel active *** Tagname Value: Alarm Time: 11/04/2012 12:12:17, Current value: 1.000000 ALARM Action: Channel Active +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 04/11/2012 11:57 bcc_robo Content-description: Mail message body Event on Tagname: Temperature_Low Status: ALM, Level: LVL *** Tagname Description: A Temperature transmitter is reading Low temp *** Tagname Value: Alarm Time: 11/04/2012 12:12:17, Current value: 1.000000 ALARM Action: Temperature High +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 04/11/2012 11:57 bcc_robo Content-description: Mail message body Event on Tagname: RH_Level_Low Status: ALM, Level: LVL *** Tagname Description: A RH transmitter is reading Low RH *** Tagname Value: Alarm Time: 11/04/2012 12:12:17, Current value: 1.000000 ALARM Action: RH Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 04/11/2012 11:57 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Level_Low Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading low level *** Tagname Value: Alarm Time: 11/04/2012 12:12:17, Current value: 1.000000 ALARM Action: Channel Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 04/09/2012 07:35 bcc_robo Content-description: Mail message body Event on Tagname: Transceiver_PWR_Toggled Status: ALM, Level: LVL *** Tagname Description: Transceiver power was toggled *** Tagname Value: Alarm Time: 09/04/2012 07:50:43, Current value: 1.000000 ALARM Action: Transceiver power was toggled +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 04/06/2012 13:07 Darren A site GMC was performed today (4-6-12). The transceiver was replaced due to the inability of the previous transceiver to roll the tuning cap plates when the system was tuned. I tried to cycle the power and roll the plates by hand but could not get the transceiver to respond. The new system was installed and tuned but the water level is currently at 13' so when it drops the system may need to be tuned again. The previous transceiver will be brought back to Kennewick and evaluated. The ARRT tag was walked into the field and detected at -6" but several test had varied results. 03/31/2012 08:37 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Level_High Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading High level *** Tagname Value: Alarm Time: 30/03/2012 08:52:36, Current value: 1.000000 ALARM Action: Channel Level High +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/30/2012 11:27 scottl Again observed random noise on the FDX-B input, looks to be some sort of AM modulation but this has net been confirmed. Although not likely, it also could be an issue with the antenna/capacitors. We need to determine what frequency this interference is if we are to try and track down the cause of it. Nothing out of the ordinary has been observed regarding the cause of the interference. Slightly retuned transceiver, RR is at -6, best that can be achieved at this time given the circumstances. 03/30/2012 08:37 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Level_High Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading High level *** Tagname Value: Alarm Time: 30/03/2012 08:52:36, Current value: 1.000000 ALARM Action: Channel Level High +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/30/2012 06:49 bcc_robo Content-description: Mail message body Event on Tagname: Transceiver_PWR_Toggled Status: ALM, Level: LVL *** Tagname Description: Transceiver power was toggled *** Tagname Value: Alarm Time: 30/03/2012 07:04:38, Current value: 1.000000 ALARM Action: Transceiver power was toggled +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/29/2012 08:00 scott BCC was opened at 0718 on 19 March 2012. 03/28/2012 11:20 Scottl Monitored the FDX-B signal for odd interference observed since the channel watered up. It appears that the interference has either gone away or has greatly diminished. It was observed when first hooked up the scope, at least I thought, but never appeared again after about 1 hr of observation. The interference that I thought I saw resembled " Ringing " of the windings of the antenna but cannot substantiated. RR is at -4 inches in manual test, ~ 9 inches automated test. Still think that there maybe some external interference or some anomaly happening with the antenna and or capacitors. Will monitor 03/20/2012 13:01 Darren PSMFC was on site to investigate the ARRT tag not reading. The transceiver was re-tuned. But as noted there appears to be something being broadcast in the air that is occasionally being detected by the transceiver. I was able to read the ARRT tag as close as -6 but not consistently. The decision was made to come back with the spectrum analyzer and try a different transceiver tomorrow. PSMFC will be speaking with site personnel to find out if there has been any new sensors or communications installed. 03/20/2012 06:44 Troy The Winter Mode was turned off due to the channel watering up and warmer weather. 03/20/2012 06:09 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Active Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading enough level to deem the channel active *** Tagname Value: Alarm Time: 19/03/2012 06:23:52, Current value: 1.000000 ALARM Action: Channel Active +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/19/2012 11:49 scottl Channel was watered up at 0700 this morning. Tuned and calibrated reader, RR at baseline or slightly under. There appears to be some random transmission of some type periodically rolling through the 2/4 Khz input. Obviously when this occurs the RR is negatively impacted. Will monitor and investigate if interference becomes an issue. 03/19/2012 10:16 Dean_Bal BCC was opened at 0718 on 19 March after "Kelt Trigger" was reached (see 2012 Fish Passage Plan for details regarding Kelt Trigger). 03/19/2012 06:09 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Active Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading enough level to deem the channel active *** Tagname Value: Alarm Time: 19/03/2012 06:23:52, Current value: 1.000000 ALARM Action: Channel Active +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/06/2012 11:07 bcc_robo Content-description: Mail message body Event on Tagname: D1_Auto Status: ALM, Level: LVL *** Tagname Description: D1 in Auto *** Tagname Value: Alarm Time: 05/03/2012 11:21:19, Current value: 1.000000 ALARM Action: D1 in Auto +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/06/2012 11:07 bcc_robo Content-description: Mail message body Event on Tagname: D2_Auto Status: ALM, Level: LVL *** Tagname Description: D2 in Auto *** Tagname Value: Alarm Time: 05/03/2012 11:21:18, Current value: 1.000000 ALARM Action: D2 in Auto +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/05/2012 11:17 bcc_robo Content-description: Mail message body Event on Tagname: D1_Flow_Alarm Status: ALM, Level: LVL *** Tagname Description: D1's flow switch failed *** Tagname Value: Alarm Time: 05/03/2012 11:31:54, Current value: 1.000000 ALARM Action: D1 flow switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/05/2012 11:15 Troy D1's fan was found to have bad bearings. The fan was replaced and D1 re- started. All is working as it should. The starter capacitor was not replaced as it was the same value that was needed for the new motor. 03/05/2012 11:07 bcc_robo Content-description: Mail message body Event on Tagname: D1_Auto Status: ALM, Level: LVL *** Tagname Description: D1 in Auto *** Tagname Value: Alarm Time: 05/03/2012 11:21:19, Current value: 1.000000 ALARM Action: D1 in Auto +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/05/2012 11:07 bcc_robo Content-description: Mail message body Event on Tagname: D2_Auto Status: ALM, Level: LVL *** Tagname Description: D2 in Auto *** Tagname Value: Alarm Time: 05/03/2012 11:21:18, Current value: 1.000000 ALARM Action: D2 in Auto +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/05/2012 11:02 bcc_robo Content-description: Mail message body Event on Tagname: D1_Current_Alarm Status: ALM, Level: LVL *** Tagname Description: D1's Current switch failed *** Tagname Value: Alarm Time: 05/03/2012 11:16:32, Current value: 1.000000 ALARM Action: D1 current switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/05/2012 11:02 bcc_robo Content-description: Mail message body Event on Tagname: D1_Flow_Alarm Status: ALM, Level: LVL *** Tagname Description: D1's flow switch failed *** Tagname Value: Alarm Time: 05/03/2012 11:16:32, Current value: 1.000000 ALARM Action: D1 flow switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/05/2012 11:02 bcc_robo Content-description: Mail message body Event on Tagname: D1_Return_Alarm Status: ALM, Level: LVL *** Tagname Description: D1 Return Air Damper failed *** Tagname Value: Alarm Time: 05/03/2012 11:16:32, Current value: 1.000000 ALARM Action: d1 return air damper failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/05/2012 11:02 bcc_robo Content-description: Mail message body Event on Tagname: D1_Intake_Alarm Status: ALM, Level: LVL *** Tagname Description: D1 Intake Air Damper failed *** Tagname Value: Alarm Time: 05/03/2012 11:16:32, Current value: 1.000000 ALARM Action: d1 intake damper failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/05/2012 10:52 bcc_robo Content-description: Mail message body Event on Tagname: D1_Flow_Alarm Status: ALM, Level: LVL *** Tagname Description: D1's flow switch failed *** Tagname Value: Alarm Time: 05/03/2012 11:06:12, Current value: 1.000000 ALARM Action: D1 flow switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/05/2012 10:52 bcc_robo Content-description: Mail message body Event on Tagname: D1_Return_Alarm Status: ALM, Level: LVL *** Tagname Description: D1 Return Air Damper failed *** Tagname Value: Alarm Time: 05/03/2012 11:06:12, Current value: 1.000000 ALARM Action: d1 return air damper failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/05/2012 10:52 bcc_robo Content-description: Mail message body Event on Tagname: D1_Intake_Alarm Status: ALM, Level: LVL *** Tagname Description: D1 Intake Air Damper failed *** Tagname Value: Alarm Time: 05/03/2012 11:06:12, Current value: 1.000000 ALARM Action: d1 intake damper failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/05/2012 10:33 bcc_robo Content-description: Mail message body Event on Tagname: D1_Current_Alarm Status: ALM, Level: LVL *** Tagname Description: D1's Current switch failed *** Tagname Value: Alarm Time: 05/03/2012 10:47:58, Current value: 1.000000 ALARM Action: D1 current switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/05/2012 10:33 bcc_robo Content-description: Mail message body Event on Tagname: D1_Flow_Alarm Status: ALM, Level: LVL *** Tagname Description: D1's flow switch failed *** Tagname Value: Alarm Time: 05/03/2012 10:47:58, Current value: 1.000000 ALARM Action: D1 flow switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/05/2012 10:33 bcc_robo Content-description: Mail message body Event on Tagname: D1_Return_Alarm Status: ALM, Level: LVL *** Tagname Description: D1 Return Air Damper failed *** Tagname Value: Alarm Time: 05/03/2012 10:47:58, Current value: 1.000000 ALARM Action: d1 return air damper failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/05/2012 10:33 bcc_robo Content-description: Mail message body Event on Tagname: D1_Intake_Alarm Status: ALM, Level: LVL *** Tagname Description: D1 Intake Air Damper failed *** Tagname Value: Alarm Time: 05/03/2012 10:47:58, Current value: 1.000000 ALARM Action: d1 intake damper failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/05/2012 10:33 bcc_robo Content-description: Mail message body Event on Tagname: D2_Return_Alarm Status: ALM, Level: LVL *** Tagname Description: D2 Return Air Damper failed *** Tagname Value: Alarm Time: 05/03/2012 10:47:45, Current value: 1.000000 ALARM Action: d2 return air damper failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/05/2012 10:33 bcc_robo Content-description: Mail message body Event on Tagname: D2_Hand Status: ALM, Level: LVL *** Tagname Description: D2 in Hand *** Tagname Value: Alarm Time: 05/03/2012 10:47:45, Current value: 1.000000 ALARM Action: D2 in Hand +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/05/2012 10:33 bcc_robo Content-description: Mail message body Event on Tagname: D2_Flow_Alarm Status: ALM, Level: LVL *** Tagname Description: D2's flow switch failed *** Tagname Value: Alarm Time: 05/03/2012 10:47:44, Current value: 1.000000 ALARM Action: D2 flow switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/05/2012 10:33 bcc_robo Content-description: Mail message body Event on Tagname: D1_Current_Alarm Status: ALM, Level: LVL *** Tagname Description: D1's Current switch failed *** Tagname Value: Alarm Time: 05/03/2012 10:47:36, Current value: 1.000000 ALARM Action: D1 current switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/05/2012 10:33 bcc_robo Content-description: Mail message body Event on Tagname: D1_Flow_Alarm Status: ALM, Level: LVL *** Tagname Description: D1's flow switch failed *** Tagname Value: Alarm Time: 05/03/2012 10:47:36, Current value: 1.000000 ALARM Action: D1 flow switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/05/2012 10:33 bcc_robo Content-description: Mail message body Event on Tagname: D1_Return_Alarm Status: ALM, Level: LVL *** Tagname Description: D1 Return Air Damper failed *** Tagname Value: Alarm Time: 05/03/2012 10:47:36, Current value: 1.000000 ALARM Action: d1 return air damper failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/05/2012 10:33 bcc_robo Content-description: Mail message body Event on Tagname: D1_Intake_Alarm Status: ALM, Level: LVL *** Tagname Description: D1 Intake Air Damper failed *** Tagname Value: Alarm Time: 05/03/2012 10:47:36, Current value: 1.000000 ALARM Action: d1 intake damper failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/05/2012 10:24 bcc_robo Content-description: Mail message body Event on Tagname: D1_Flow_Alarm Status: ALM, Level: LVL *** Tagname Description: D1's flow switch failed *** Tagname Value: Alarm Time: 05/03/2012 10:39:11, Current value: 1.000000 ALARM Action: D1 flow switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/04/2012 09:13 bcc_robo Content-description: Mail message body Event on Tagname: D1_Interlocks Status: ALM, Level: LVL *** Tagname Description: D1 interlock problem indication *** Tagname Value: Alarm Time: 03/03/2012 09:27:43, Current value: 1.000000 ALARM Action: D1 interlock problem +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/04/2012 09:13 bcc_robo Content-description: Mail message body Event on Tagname: D2_INT_Start_Req Status: ALM, Level: LVL *** Tagname Description: D2 Auto Start Request due to Interlock problems with D1 *** Tagname Value: Alarm Time: 03/03/2012 09:27:43, Current value: 1.000000 ALARM Action: Interlock problem with D1 Start Request sent to D2 +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/04/2012 09:13 bcc_robo Content-description: Mail message body Event on Tagname: D1_Flow_Alarm Status: ALM, Level: LVL *** Tagname Description: D1's flow switch failed *** Tagname Value: Alarm Time: 03/03/2012 09:27:28, Current value: 1.000000 ALARM Action: D1 flow switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/03/2012 14:49 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Level_Low Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading low level *** Tagname Value: Alarm Time: 02/03/2012 15:04:07, Current value: 1.000000 ALARM Action: Channel Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/03/2012 09:13 bcc_robo Content-description: Mail message body Event on Tagname: D1_Interlocks Status: ALM, Level: LVL *** Tagname Description: D1 interlock problem indication *** Tagname Value: Alarm Time: 03/03/2012 09:27:43, Current value: 1.000000 ALARM Action: D1 interlock problem +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/03/2012 09:13 bcc_robo Content-description: Mail message body Event on Tagname: D2_INT_Start_Req Status: ALM, Level: LVL *** Tagname Description: D2 Auto Start Request due to Interlock problems with D1 *** Tagname Value: Alarm Time: 03/03/2012 09:27:43, Current value: 1.000000 ALARM Action: Interlock problem with D1 Start Request sent to D2 +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/03/2012 09:13 bcc_robo Content-description: Mail message body Event on Tagname: D1_Flow_Alarm Status: ALM, Level: LVL *** Tagname Description: D1's flow switch failed *** Tagname Value: Alarm Time: 03/03/2012 09:27:28, Current value: 1.000000 ALARM Action: D1 flow switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/02/2012 14:49 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Level_Low Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading low level *** Tagname Value: Alarm Time: 02/03/2012 15:04:07, Current value: 1.000000 ALARM Action: Channel Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/02/2012 14:33 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Active Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading enough level to deem the channel active *** Tagname Value: Alarm Time: 02/03/2012 14:48:03, Current value: 1.000000 ALARM Action: Channel Active +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/02/2012 14:32 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Level_Low Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading low level *** Tagname Value: Alarm Time: 02/03/2012 14:46:10, Current value: 1.000000 ALARM Action: Channel Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/02/2012 13:33 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Active Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading enough level to deem the channel active *** Tagname Value: Alarm Time: 02/03/2012 13:47:48, Current value: 1.000000 ALARM Action: Channel Active +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/02/2012 13:28 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Level_Low Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading low level *** Tagname Value: Alarm Time: 02/03/2012 13:42:28, Current value: 1.000000 ALARM Action: Channel Level Low +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 03/02/2012 12:30 bcc_robo Content-description: Mail message body Event on Tagname: Channel_Active Status: ALM, Level: LVL *** Tagname Description: A Level transmitter is reading enough level to deem the channel active *** Tagname Value: Alarm Time: 02/03/2012 12:44:40, Current value: 1.000000 ALARM Action: Channel Active +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 02/25/2012 09:36 Troy D1 stopped running due to a air flow alarms (no air flow) either the flow switch has failed or the wind storm is causing the flow switch to fail or there is a problem with the units fan. PSMFC will investigate. D2 started as it should. I remoted in and cleared the interlock alarm so the D1 could be re-started if needed. 02/25/2012 09:18 bcc_robo Content-description: Mail message body Event on Tagname: D1_Interlocks Status: ALM, Level: LVL *** Tagname Description: D1 interlock problem indication *** Tagname Value: Alarm Time: 25/02/2012 09:32:35, Current value: 1.000000 ALARM Action: D1 interlock problem +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 02/25/2012 09:18 bcc_robo Content-description: Mail message body Event on Tagname: D2_INT_Start_Req Status: ALM, Level: LVL *** Tagname Description: D2 Auto Start Request due to Interlock problems with D1 *** Tagname Value: Alarm Time: 25/02/2012 09:32:35, Current value: 1.000000 ALARM Action: Interlock problem with D1 Start Request sent to D2 +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 02/25/2012 09:18 bcc_robo Content-description: Mail message body Event on Tagname: D1_Flow_Alarm Status: ALM, Level: LVL *** Tagname Description: D1's flow switch failed *** Tagname Value: Alarm Time: 25/02/2012 09:32:20, Current value: 1.000000 ALARM Action: D1 flow switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 02/23/2012 07:51 scottl Set the reader to log the test tag and retrained timer tags. The reader should now report test tags to the data files. Will monitor. 02/21/2012 14:17 Troy De-humidifier checks were performed 02/21/2012. Filters were replaced as needed on the de-humidification system and the HVAC system. ARRT was opened and lubed and cycled several times. All appears and sounds to be working well. A slight PLC and HMI programming change was done to allow maintenance to override the channel up/channel down logic. No problems to report. 02/21/2012 12:39 scottl Set reader current and voltage calibration scale and offset values. Reader will now display correct values in BCC graphs. 02/21/2012 11:31 bcc_robo Content-description: Mail message body Event on Tagname: D2_Interlocks Status: ALM, Level: LVL *** Tagname Description: D2 interlock problem indication *** Tagname Value: Alarm Time: 21/02/2012 11:45:43, Current value: 1.000000 ALARM Action: D2 interlock problem +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 02/21/2012 11:31 bcc_robo Content-description: Mail message body Event on Tagname: D1_INT_Start_Req Status: ALM, Level: LVL *** Tagname Description: D1 Auto Start Request due to Interlock problems with D2 *** Tagname Value: Alarm Time: 21/02/2012 11:45:43, Current value: 1.000000 ALARM Action: Interlock problem with D2 Start Request sent to D1 +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 02/21/2012 11:31 bcc_robo Content-description: Mail message body Event on Tagname: D2_Flow_Alarm Status: ALM, Level: LVL *** Tagname Description: D2's flow switch failed *** Tagname Value: Alarm Time: 21/02/2012 11:45:28, Current value: 1.000000 ALARM Action: D2 flow switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 02/21/2012 11:23 bcc_robo Content-description: Mail message body Event on Tagname: D1_Interlocks Status: ALM, Level: LVL *** Tagname Description: D1 interlock problem indication *** Tagname Value: Alarm Time: 21/02/2012 11:37:03, Current value: 1.000000 ALARM Action: D1 interlock problem +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 02/21/2012 11:23 bcc_robo Content-description: Mail message body Event on Tagname: D2_INT_Start_Req Status: ALM, Level: LVL *** Tagname Description: D2 Auto Start Request due to Interlock problems with D1 *** Tagname Value: Alarm Time: 21/02/2012 11:37:03, Current value: 1.000000 ALARM Action: Interlock problem with D1 Start Request sent to D2 +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 02/21/2012 11:22 bcc_robo Content-description: Mail message body Event on Tagname: D1_Flow_Alarm Status: ALM, Level: LVL *** Tagname Description: D1's flow switch failed *** Tagname Value: Alarm Time: 21/02/2012 11:36:48, Current value: 1.000000 ALARM Action: D1 flow switch failed +++++++++++++++++++++++++++++++++++++++++++++++++++ This Email has been generated automatically by: *** Device Identification: WebPort *** Device Description: *** Device TCP/IP addresses Ethernet: http://192.168.103.57 PPP: http://0.0.0.0 +++++++++++++++++++++++++++++++++++++++++++++++++++ 02/16/2012 11:28 Roger The BCC antenna seals were inspected and look OK. The BCC transceiver has been re-installed, powered up, and rough tuned. Final fine tuning will be done when the channel is watered up. 01/21/2012 09:41 Troy The ISP was contacted and is aware that there is an outage in the area. The event ID is 108420. 01/17/2012 15:04 scottl The transciever was removed from operation at 1445 PST for recalibration at the factory. Will re-install when Cal is completed. No PIT tag detection will be available until that time. 01/01/2012 00:00 PTOC_Bot Annual log file initiation for BCC #### End of Event Log for BCC ###